800x494-rollercoaster-illos-05

Roller Coaster Science: Thrills, Chills, and Physics

The first roller coaster at Coney Island, which opened in June 1884, would barely rate in the kiddie section of a modern-day amusement park. The “Switchback Railway” trundled along at just six miles per hour over a series of gentle hills.

Nowadays, roller coasters can put you through loop-de-loops, send you screaming up 38 stories to momentarily rise up free of gravity, and even hang you from a shoulder harness, limbs a-dangle, shooting through corkscrews and switchbacks and cobra turns, with your life in the hands of engineering. Arguably, no other leisure activity makes physics quite so visceral as the roller coaster. Here’s a quick breakdown of the forces that cause your stomach to drop—and keep you in your seat.

750rollercoaster-illos-04

Climbing the Hill

On the oldest roller coasters, the first hill (also known as the “lift hill”) was always the tallest, so as to exploit its potential energy, which is the product of the train’s mass, the standard acceleration of gravity on Earth (9.8 meters per second squared), and the height of the hill. Potential energy is invested in objects based on their position in a system—in this case, in a gravitational field.

(There are actually other types of potential energy, too. There’s elastic potential energy caused by deformation of some elastic object (such as, say, a ball attached to a spring that’s been stretched out), and electric potential energy and magnetic potential energy as well.)

When the roller coaster starts flying down the hill, it gains kinetic energy and loses potential energy. At the bottom of the lift hill, the train’s kinetic energy is at the highest point it’ll be on the track, enough to push it through the succession of smaller hills and turns.

750rollercoaster-illos-01

Squash and Stretch

G-force is a term that gets bandied about a lot, but it’s actually not really a proper “force”; it’s a product of acceleration. On Earth, you’re in an environment of 1 G. Accelerate away from or in the same direction as the Earth’s pull on your body, and you create an equal and opposite reaction that you can feel in your weight.

When you accelerate upward on a roller coaster, the added Gs (sometimes called “positive G”) makes it feel like you are heavier and being squashed downward. Likewise, when you accelerate downward (like while strapped into a roller coaster that’s diving down a hill), you can experience negative G-forces that lift you up out of your seat.

Controlling G-forces is one of the primary concerns in roller coaster design—too many Gs, or too swift a transition between positive and negative G, can tip from thrilling into uncomfortable or even dangerous.

750rollercoaster-illos-02

Making the Turn

Accelerating around a horizontal turn also creates G-force, in this case called “lateral G.” If strong enough, lateral Gs can sometimes throw passengers against the side of a train car. To avoid this, roller coasters are often built with banked turns. This helps convert some of the lateral G into a positive or negative G, reducing the amount you slide about.

750rollercoaster-illos-03

Threading the Loop

How do you stay in your seat during a loop-de-loop? Again, it’s another balance of physics. Movement along a curved path creates centripetal acceleration, which points to the center of the imaginary circle drawn by the curve. However, you stay in your seat because there’s another factor at play: inertia. Your body naturally wants to keep going in a straight path, and this combined with centripetal acceleration creates a feeling of being pushed outward—a phenomenon sometimes called “centrifugal force,” though like G-force it’s not really a proper force.

If you look at a modern roller coaster, you might notice that the loop-de-loops are shaped more like teardrops than like circles. This shape, called a clothoid, uses simple physics to make it easier on both the train and passengers. The key factor is the fact that unlike a circular loop, which has a single radius, the clothoid loop has a smaller radius on top.

The difference in radii is important because, in order for a train to complete a loop, the centripetal acceleration of the cars has to be more than or equal to the acceleration of gravity. Since centripetal acceleration is the product of the velocity squared divided by the radius of the loop, the decrease in the radius at the top automatically increases the centripetal acceleration at the top. Thus, the train doesn’t have to be traveling incredibly fast to complete the loop. As the train exits the loop, the wider radius at the bottom of the loop naturally decreases the centripetal acceleration, which in turn decreases the amount of Gs imposed on the riders.

For a deeper dive into clothoids and the physics of loop-de-loops, check out this informative page produced by the University of Gothenburg and Sweden’s Liseberg amusement park.

Now, hopefully, you’ll know enough about the forces behind roller coasters to keep your friends and family entertained while you all wait in line to experience the thrilling terror of physics.

By:

Sign up for our free newsletter to see exclusive features and be the first to get news and updates on upcoming WSF programs.

  • Share This:
12 comments
Rahul Return
Rahul Return

How many will number in the side of slack side note if will attack of wind force.

Prince Ajinkya
Prince Ajinkya

Potential energy get converted into total kinetic energy and Tke = rot ke + rol ke

Isabel Mendiola
Isabel Mendiola

Potential, kinetic energy.. My favorite topics in Physics!!

Usman Mahar
Usman Mahar

when kinetic is maximum then potetial will be zero its first law of newton

Khaled Eddhabi
Khaled Eddhabi

KE=0 Kinetic energy ــــــــــــــــــــv=0